Replacement Windows Discussion Board Forum

Personally I’d say you got great pricing on a very good window. I see no reason to go further.

I’d take the Unishield.

The 500 seems to be exactly what you are looking for.
It’s better than the Pro-Via and has performance numbers that rival the other 2.

IRC code states that any window within 24”of a door from edge of door to edge of glass on a window needs to be tempered. There also many exceptions To the rule that would eliminate the requirement oF tempered glass. A nail finned window or door is never required by code and what is best depends on t...

The price increase is inline with dealer cost. It does not have krypton, just 2 of the 3 panes with Low-E. I don’t know if it’s worth it or not It appears you are comparing the Supreme 3 to the Ultimate 2. Even though triple pane windows can have low-E on surface 4 it is only more of a concern on du...

Most “national” owned companies are individually owned franchised companies . Look for ones that have stood by their manufacturer vs ones that keep seeking bottom dollar. The 3 hour presentation is hard to to predict as many use it as a sales tactic. Typically I can measure out house in 15 minutes ,...

There are things to consider when only doing a partial replacement when choosing between inserts , “full frame” and finned new construction windows. The latter 2 Are gonna give more viewable glass but they can change inward and outward appearances. Ideally you choose something that meshes with your ...

I agree with WOW on the both, I think the 2x6 is minimal but we I ain’t no engineer so why not go bigger . While you’re at it I would want the sill tilted 5degrees for drainage along with some pan flashing . You may want some Additional framing at the spit and back side which could go horizontal or ...

They are not set into the cams
The cams or pins on the sash broke
The balance/coil spring broke.
Got any broken parts in the well?
Any pics?

Glass is usually only 20years. See if you have any other stickers in the head if the frame if Double hung or on the sides of the sashes.
Keep in mind if you find anything more promising more than likely you will get a the glass pack only which will have installation charges .

Forgot to mention, the Delmar comes with an extruded screen vs roll form which is nice but not deal breaking. To save time , I made all my comments based off the single hung model. The Delmar is also dealer exclusive which means a scrub like me could go and buy the Catalina vs a dealer that is more ...

After looking at the numbers and a little reading they appear to be same window. The Delmar is the only one that can have foam but the gains are very little, the extra weatherstripping and differences in sash reinforcement almost add nothing as well. The biggest difference I see that comes standard ...

Yes, the fiberglass and foam enhance the thermal numbers.
The LC designation is old and not really used anymore but seem low.
Have you gave them eye test?
It is hard to argue with your reasoning without knowing more.
What are the 2 lines of windows you comparing?

Might even need a double 2x8. It should have specced out in the plans used to get the permit. The 2nd effort was much improved. But still a hack job.

You could look at the DP and air infiltration numbers as well, this could be more telling. I think this sash reinforcement would be a worthwhile, this could increase the DP rating and Eliminate future sagging issues. The solar numbers should be compared. To answer your question more simply, it depen...