how to mesure the angle

Ask replacement window questions & get answers!
Post Reply
Message
Author
trickyrick
Posts: 4
Joined: Fri Apr 19, 2019 2:53 pm

how to mesure the angle

#1 Post by trickyrick »

I have a bay window one large pane with a smaller one on each side of the lager pane set at an angle
I want to order a replacement and would like to know how I measure the angle. [urlhttps://drive.google.com/file/d/1iQAZ-vkuRHBZM0HKOlUZrD4FOq_SbnML/view?usp=sharing][/url]

WindowsDirectCinci
Posts: 250
Joined: Sun Feb 28, 2016 2:46 pm

Re: how to mesure the angle

#2 Post by WindowsDirectCinci »

I couldn’t see the photo.... most bay units are ordered at 15,30, or 45 degree angles. They correlate with the projection also

trickyrick
Posts: 4
Joined: Fri Apr 19, 2019 2:53 pm

Re: how to mesure the angle

#3 Post by trickyrick »


trickyrick
Posts: 4
Joined: Fri Apr 19, 2019 2:53 pm

Re: how to mesure the angle

#4 Post by trickyrick »

Looking at the picture Im assuming that you use No2 to get the angle

User avatar
Windows on Washington
Posts: 5308
Joined: Fri Oct 27, 2006 11:23 am
Location: DC Metropolitan Area-Maryland/Virginia/DC

Re: how to mesure the angle

#5 Post by Windows on Washington »

Replacement for the window, or the Bay in total.

trickyrick
Posts: 4
Joined: Fri Apr 19, 2019 2:53 pm

Re: how to mesure the angle

#6 Post by trickyrick »

I want to replace the whole bay window. There are not many company's that have vinyl outside and wood inside. When I go to home depot I will have to tell them the angle of the window on the right and left of the center pane

Ricknez
Posts: 130
Joined: Fri Sep 13, 2013 9:18 am
Location: southern PA, north east MD

Re: how to mesure the angle

#7 Post by Ricknez »

If home depot actually gets your order correct you should put it on youtube because no one will ever believe it.

User avatar
Windows on Washington
Posts: 5308
Joined: Fri Oct 27, 2006 11:23 am
Location: DC Metropolitan Area-Maryland/Virginia/DC

Re: how to mesure the angle

#8 Post by Windows on Washington »

Get the size of the unit and you can ask the supplier for the projections on the 30 degree and 45 degree bays.

Post Reply