Need help in identifying a window brand

Ask replacement window questions & get answers!
Post Reply
Message
Author
jaxdawg@gmail.com
Posts: 5
Joined: Wed Jun 08, 2016 5:28 pm

Need help in identifying a window brand

#1 Post by jaxdawg@gmail.com »

Hi folks. I need to replace the lower sash in several windows, but don't see a window brand stamped anywhere. On the window hardware there is a "GA", but I've not been able to track down what that brand is. (it may be "CA", but I believe "GA" is correct)
If it helps to post a picture, I can do that as well.

Thanks all! This has really been frustrating.

Randy

User avatar
Windows on Washington
Posts: 5311
Joined: Fri Oct 27, 2006 11:23 am
Location: DC Metropolitan Area-Maryland/Virginia/DC

Re: Need help in identifying a window brand

#2 Post by Windows on Washington »

Randy,

You probably need another post or two to attach a picture. Try posting it again or linking it from another photo site or similar.

jaxdawg@gmail.com
Posts: 5
Joined: Wed Jun 08, 2016 5:28 pm

Re: Need help in identifying a window brand

#3 Post by jaxdawg@gmail.com »

Here is a pic of the hardware (link below), the only thing on the window with markings.
There is a sticker, but its just AAMA info. If a picture of something else would help, please advise ... again THANKS!

Randy
https://goo.gl/photos/fWTeeGW4KvkKZ7fu7

User avatar
Windows on Washington
Posts: 5311
Joined: Fri Oct 27, 2006 11:23 am
Location: DC Metropolitan Area-Maryland/Virginia/DC

Re: Need help in identifying a window brand

#4 Post by Windows on Washington »

Randy,

The lock isn't going to tell you much unless is it branded to that window. Most locks are not. I will confess to not recognizing anything there in that picture.

Try a picture from further back to show the window and if it tilts in, check the head pocket and/or sides.

I will say this, based on the age of the unit, you might have trouble sourcing that sash.

User avatar
HomeSealed
Posts: 2996
Joined: Mon Feb 15, 2010 3:46 pm
Location: Milwaukee, Madison, SE Wisconsin

Re: Need help in identifying a window brand

#5 Post by HomeSealed »

+1. Looks like a design that is 20+ years old. Quite possibly a manufacturer that is no longer around.

What is the reason for replacing the entire sash? Most of the parts (glass, hardware, etc) could be replaced individually if defective. The other factor of course is the ROI if you are talking about replacing pieces that could be somewhat pricey on a window that may be at or near its life expectancy... Just something to think about...

jaxdawg@gmail.com
Posts: 5
Joined: Wed Jun 08, 2016 5:28 pm

Re: Need help in identifying a window brand

#6 Post by jaxdawg@gmail.com »

Thanks, gang. A few more photos below. The window slides up and down, not out.
The house was built in 2003, so I doubt the windows are as old as you are thinking. Every window in the house has the same hardware, btw. There are no markings anywhere that I can see as to a brand/model for these windows (I've opened several windows and looked all over)- thus my posts here.
Again, I appreciate all of the help!

More photos:
https://goo.gl/photos/LAZX24Z1UaAWb5ft6
https://goo.gl/photos/JTif5rvVh9u36vgg7
https://goo.gl/photos/vHo53x5yDLqxyqZ27

Window4U (IL)
Posts: 1548
Joined: Thu Oct 07, 2004 8:46 am
Location: Sales and Installation in Chicagoland and Central Illinois

Re: Need help in identifying a window brand

#7 Post by Window4U (IL) »

I have the answer for you. It's a window from General Aluminum in Carrollton, Texas They seem to be still in business. The window has a 10 year warranty from what I read.

Here's a post on Swissco's website, who is a parts supplier for current and old discontinued windows.
http://www.swisco.com/discussions/Repla ... k-77-33809

jaxdawg@gmail.com
Posts: 5
Joined: Wed Jun 08, 2016 5:28 pm

Re: Need help in identifying a window brand

#8 Post by jaxdawg@gmail.com »

AWESOME! Thank you so much.
There are several dealers in town, so I'll look one up.

Much appreciated!
Randy

User avatar
HomeSealed
Posts: 2996
Joined: Mon Feb 15, 2010 3:46 pm
Location: Milwaukee, Madison, SE Wisconsin

Re: Need help in identifying a window brand

#9 Post by HomeSealed »

Window4U coming through!

... Great to have a source for parts. Despite not being quite as old as thought, it would still be wise to consider the overall condition and performance of the existing units and the cost of repairs, vs replacement once you have those numbers in hand. I have no familiarity with that product, however a 10 year warranty on a vinyl window probably speaks to the quality, and not in a good way.

jaxdawg@gmail.com
Posts: 5
Joined: Wed Jun 08, 2016 5:28 pm

Re: Need help in identifying a window brand

#10 Post by jaxdawg@gmail.com »

Right. Builder grade, obviously.
I'm getting ready to sell the house, so trying/hoping to get out of this without replacing the whole darn thing. Got about 4 of them in this condition.

Apparently, there have been a lot of complaints with these windows. On top of that, the crappy warrantly only applies if you are the original owner.

Here are a couple of threads, if curious
http://www.ripoffreport.com/r/General-A ... on-1117313
http://www.complaintsboard.com/complain ... 96960.html
http://www.complaintsboard.com/complain ... 57546.html

User avatar
HomeSealed
Posts: 2996
Joined: Mon Feb 15, 2010 3:46 pm
Location: Milwaukee, Madison, SE Wisconsin

Re: Need help in identifying a window brand

#11 Post by HomeSealed »

jaxdawg@gmail.com wrote: I'm getting ready to sell the house, so trying/hoping to get out of this without replacing the whole darn thing. Got about 4 of them in this condition.

Gotcha!

User avatar
Windows on Washington
Posts: 5311
Joined: Fri Oct 27, 2006 11:23 am
Location: DC Metropolitan Area-Maryland/Virginia/DC

Re: Need help in identifying a window brand

#12 Post by Windows on Washington »

Keep us posted how it turns out.

Great pull Window4U.

Post Reply