Hi everyone,
I am brand new to the site. A homeowner trying to take advantage of the tax credit. Some handy skills but not up to the task of putting in high windows. I just purchased 14 silverline 8500 series replacement windows. The 12 DH's were fine but when we put in the 2 picture replacements, my wife and I noticed the grids were uneven (big difference in the lite sizes). Not misaligned grids but different size lites. They are 16 lite windows and every lite has a different size lite next to it. The grid spacing should be a system of simple math to match length and width in a given opening. has anyone seen or dealt with this problem? We have a small complement dh on each side of each picture window. The windows are not calked, trimmed or screwed in yet just being held by a couple anchors so the won't fall out. Calling the manafacturer tomorrow to see what my options are. I can't belive they left the factory like this. I would appreciate all comments.
different size lites on picture window (replacement)
-
- Posts: 2
- Joined: Sun Oct 24, 2010 11:36 am
- TheWindowNerd
- Posts: 2240
- Joined: Fri Apr 17, 2009 3:05 pm
- Location: SE PA & NJ; DFW/Metroplex
Re: different size lites on picture window (replacement)
based on your description sounds like a mfg error. have your supplier come take pictures and get it fixed.
More than likely you can just get the new glass and reglazeit, that way you can complete your install. Check with supplier 1st and get response by fax or email(in writing).
More than likely you can just get the new glass and reglazeit, that way you can complete your install. Check with supplier 1st and get response by fax or email(in writing).
-
- Posts: 2
- Joined: Sun Oct 24, 2010 11:36 am
Re: different size lites on picture window (replacement)
Thanks Anthony... I'll contact my lumber yard in the am. A little off would have been fine but it looks like someone left the quality control room that day.
- Windows on Washington
- Posts: 5344
- Joined: Fri Oct 27, 2006 11:23 am
- Location: DC Metropolitan Area-Maryland/Virginia/DC
Re: different size lites on picture window (replacement)
+1anthony wrote:based on your description sounds like a mfg error. have your supplier come take pictures and get it fixed.
More than likely you can just get the new glass and reglazeit, that way you can complete your install. Check with supplier 1st and get response by fax or email(in writing).
-
- Posts: 59
- Joined: Thu Jun 25, 2009 3:15 pm
Re: different size lites on picture window (replacement)
Were the grids in the fixed made to align with nearby double hungs? Also, the grid blocks may be different in size due to the possible difference in the master frame extrusion from the hungs to the fixed.