Replacement Windows Discussion Board Forum

We tried Ideal as an alternative to Okna. We had terrible QC issues with Majestic. I like the Okna 800Dx the best. With out seeing the total scope, we would charge 21K. We are the best value in our market. The 800Dx is a very tight well built unit. My installers hate to touch anything else. theWindo...

What town and state are you in?

I would look for a much better performing window.
High performance vinyl or composite windows < .03AL ( air leakage) is the key test result you should look for. That and a pro foam gun.

theWindowNerd

A .08 air leakage is a no go for me.

Besides that I am an Okna dealer, a little biased, but SL was my previous vendor before they killed the relationship with horrible QC.
theWindowNerd

I like Pella for this : two options I would look at:
Impervia direct set
or
Lifestyles direct set

you can do tempered obscure low e argon, you will have to check if you can add Sun Defense with those options.
wayne theWindowNerd

Different dealers offer different lines or series of Okna windows.
In double hung I like the 800 EnviroStar.

theWindowNerd

I think post 6 missed the point. You are deglazing an existing IGU to reglaze into a different frame. That fixed CMR will stay in place till you demo the whole frame. To deglaze the glass you need to remove the glazing stops, insert and run a putty knife between the exterior glass surface and the al...

We use the N1 silicone

alcohol or lacquer thinner

theWindowNerd

We most often use Soudal medium modulus silicone, if we are doing white or clear.
Color is a judgement based on gaps to be sealed, clear can make for some ultra clean lines.
If we need a color and it has to be paintable Quad or quad max.

Depending where you are in NJ. Delaware ike could be your best option. If central NJ I could help ya.
What town/city are you in.

Okna is what most are going to suggest. I like the 800DX the best.

thewindownerd.com@gmail.com

Find a regional sales rep, someone that works directly for the MFG, for Pella, Marvin,and AW, ask them who they would trust to install windows in their own house.
We have installed windows for many pople related to the industry.
theWindwNerd

If the installers get one out in decent shape then you can use it.
Not only is it old, it is thin builders grade glass. Instead o 1/8 it is single strength and cracks easily.
theWindowNerd.com

Eric is correct G8 window beige is a good match for Okna almond/beige. What Marivin color you thinking, Cashmere? It is the closest to Okna almond. Besides asthetics you will be concerned with budget and draft. If you are doing almond both side then you will look at the Okna 600, assuming DH. If spl...

I would go with option 2
theWindowNerd

RRP is not lead abatement. It is lead safe wok and protocols required by the EPA. We all hate it.
My partner just changed ours to $150 per window.

Good choice.
theWindowNerd

This is a personal comment. I would use the Okna 600/6600DX.
Sounds like I should open a division in Nashville.
theWindowNerd.com